Ultrasonic Flaw Detector TFD806C with Calibration Block V2 Carbon Steel

Specifications Range：0-10000 mm ,at steel velocity Material Velocity：100～20000 m/s Pulse Repetition Frequency：10-2000Hz Dynamic range：≥38dB Linearity: Horizontal: +/-0.2%, Vertical: 2.0%(Horizontal:+/-0.2% FSW Vertical: 0.25% FSH ) Resolving Power：>40dB (5P14) Sensitivity Leavings：>68dB Reject (suppression): 0 to 80% full screen height 500 independence setup, any criterion can be input freely, we can work in the scene without test block； Big memory of 1000 A graph Test Modes: Pulse echo, dual element and thru-transmission Probe Types: Single Straight, Single Angle,Daul Straight, Daul Anlge,Thrugh,Creeping,Surface Gate Monitors: Two independent gates controllable over entire sweep range Units: Inch or millimeter Power Requirements: AC Mains 100-240 VAC, 50-60 Hz Display Delay: -20 to 3400 µs Probe Delay/Zero Offset : 0 to 99.99µs Internal rechargeable Li-ion battery pack rated 7.2V at 8000 mAh 15 hours nominal operating time depending on display brightness 4 hours typical recharge time H×W×D(mm)：250×165×55 (mm) Weight ：1.2kg Operating Temperature: -10℃ to 50℃ Storage Temperature: -30℃ to 50℃ Pulse Energy: 70V,100V,200V, 300V, 400V, 500V selectable Rectification: Positive half wave, negative half wave, full wave, RF System Bandwidth (amplifier bandpass ): 0.2 to 25 MHz Gate Monitors: Two independent gates controllable over entire sweep range Sensitivity: 120 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB. Transducer Connections: BNC or LEMOFunctionsAutomated display precise flaw location(Depth d、level p、distance s、amplitude、sz dB、ф).Flaw sizing: Automatic flaw sizing using AVG or DAC/TCG, speeds reporting of defect acceptance or rejection.Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity . ( V2 and two hole )Convenient to make and use DAC/TCG and AVG to evaluate the echo, the curve can be modified and compensated.Connectting U-Disk，the unit can get unlimited memory.There are 15 standards of in the unit.Blue tooth connection to mobile device to generate and print detection reports on-site.(Option)AWS D1.1.Curved Surface Correction feature.Crack Height Measure function.Magnify gate：spreading of the gate range over the entire screen width.Auto-gain function.Envelope: Simultaneous display of live A-scan at 70 Hz update rate and envelope of A-scandisplay.Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.Scan Freeze：Display freeze holds waveform and sound path data.Alarm：Beep and LED.Real Time Clock.Fill echo.Capture mark.Echo color within the Gate.Base Instrument PackagePortable Ultrasonic Flaw DetectorStraight Beam Transducer (2.5 MHz, Φ20)Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)Interconnect Cable for the transducer (Q9-C5，or optional C9- C5)Rechargeable Li-Ion Battery Package, 8 amp hourPower supply/charger unitOperating Manual in EnglishApp Softwareprotective rubber casingStrap

• Package includes:Ultrasonic flaw detector TFD806C standard set+V2 calibration block
• User friendly dialog interactive helps operations like Calibration, making curves, etc. All tools you need: DAC, AVG, TCG AWS, etc.
• Pulse Repeatition Frequency: 10-2000Hz precise adjust, high speed scan, no miss out.
• High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.
• 12-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.