DPA 4017B Shotgun Microphone

DPA 4017B Shotgun Microphone

The DPA 4017B Shotgun Microphone is a professional, versatile microphone designed for demanding sound capturing in film, video, sound reinforcement and even music recording. The supercardioid, lobe-shaped polar pattern is coupled with excellent off-axis signal rejection for a focused pickup, enhanced range and minimal noise. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.

The 4017B's frequency response, dynamic range, and signal-to-noise ratio result in pristine, transparent signal reproduction. Two onboard filters eliminate noise and artifacts with a 4dB shelf at 8kHz and a first-order bass roll-off below 120Hz. The short, lightweight profile of the 4017B make it a suitable choice for both indoor and outdoor production with boompoles, handheld shock-mounts, etc.

Wide Frequency Response and Excellent Clarity The 4017B's frequency response, dynamic range, and signal-to-noise ratio result in pristine, transparent signal reproduction. Superb Off-Axis Rejection The supercardioid, lobe-shaped polar pattern is coupled with excellent off-axis signal rejection for a focused pickup, enhanced range and minimal noise, etc. Short and Lightweight Profile The short, lightweight profile of the 4017B make it a suitable choice for both indoor and outdoor production with boompoles, handheld shock-mounts, etc.

Key Features

• Excellent Off-Axis Rejection
• Immune to RFI
• Short and Lightweight
• Remarkable Clarity

Technical Specs

Transducer

Pre-Polarized Condenser

Polar Pattern

Supercardioid with Interference Tube

Frequency Response

70Hz - 20kHz, permanent third order high pass filter at 50Hz (+/-2dB)

Sensitivity

nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa

EIN

A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))

Noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB)

Dynamic Range (Typical)

Typ. 119 dB

Signal-to-Noise Ratio

Typ. 80dB (A)

THD

< 1 % up to 133 dB SPL peak

Common Mode Rejection

> 40dB

Maximum Input Sound Level

152dB

Power Requirements

48V Phantom Power

Current Consumption:

4.5mA

Output Voltage:

> 1.8V

Output Impedance

> 150 ohms

Output Connectors

3-pin XLR Cable Drive: 328' (100m)

Pad

No

Low Frequency Roll-Off

Permanent third order high pass filter at 50Hz

Temperature

-40 ° to 45 °C (14 ° to 113 °F)

Operating Relative Humidity

Up to 90%

Dimensions

8.3 x 0.75" (212 x 19mm) (Length x Diameter)

Weight

68g (2.4 oz)